This little wallet is so easy and fast - make them in sets of 3 or 4 - keep a few around for gifts.
Also good for credit cards, "Courtesy cards", gift cards, loads of uses!
I honestly don't know who originally came up with this concept, but since I started looking around to see what others posted for ideas for this, I've found at least a dozen versions on blogs and websites. I sincerely hope I'm not violating any copyright laws by posting this here for my guild. I wrote these instructions myself - they may or may not be similar to the instructions on a published pattern.
NOTE: as a substitute for a yo-yo – use a circle or flower shape cut with a die cutter! (use a fusible, of course!) fused under button placement.
With elastic in correct position opposite button… layer right sides together and pin.
I used lots of pins to hold the layers together....
Sew around outside edges - use a 'generous' 1/4" seam, leave an opening at the top back edge (the side the elastic is on) for turning - you want to be able to get your thumb into that hole!
I sew straight off the edges, then come back and angle the corners like this.
Trim seam allowances at corners to reduce bulk - trim away any extra fusible interfacing while you're at it...
I like to press the seam allowance open - put a piece of cardstock (a postcard that's fallen out of a magazine works great!) against the seam line where the opening is and press against the cardstock to fold open the seam allowance. Pressing this open now will make it easier to match the edges after you turn it right side out. Not a critical step, but helpful.
Turn wallet right side out.
Put the top stitching thread back in your machine and...
Also good for credit cards, "Courtesy cards", gift cards, loads of uses!
I honestly don't know who originally came up with this concept, but since I started looking around to see what others posted for ideas for this, I've found at least a dozen versions on blogs and websites. I sincerely hope I'm not violating any copyright laws by posting this here for my guild. I wrote these instructions myself - they may or may not be similar to the instructions on a published pattern.
Finished size: 3 ¼” x 4 ½”
For 3 wallets,
cut 7” strips across the full width of 2 fabrics (WOF)
Sub-cut 2 contrasting fabrics in the following sizes:
Fabric A: Cut a piece 7” x 5” – for outside
Cut one 7” x 7” for ‘tall’ pocket
Fabric B: Cut one piece 7” x 5” – for lining
Cut a piece 7” x 4 ½” for ‘short’ pocket
a scrap for yo-yo
Fabric A: Cut a piece 7” x 5” – for outside
Cut one 7” x 7” for ‘tall’ pocket
Fabric B: Cut one piece 7” x 5” – for lining
Cut a piece 7” x 4 ½” for ‘short’ pocket
a scrap for yo-yo
Also: 1 coordinating button (smaller than the yo-yo)
A piece of ribbon or elastic approx. 5” long – I use pony tail elastics from the dollar store.
1 small contrasting yo-yo (optional – not recommended with a large button)
Fusible lightweight interfacing cut 6 ½” x 4 ½”
– attach to wrong side of outside wallet piece only – centered on a 5"x7" piece.
– attach to wrong side of outside wallet piece only – centered on a 5"x7" piece.
Also - you can get 4 wallets from 2 fat quarters if you cut them just right.
FROM FAT QUARTERS:
CUT 7” X 18” STRIPS FROM 18” X 22” FQ
subcut sizes as above –– 4 WALLETS FROM 2 FQ’S! 2 of each ‘arrangement’.
subcut sizes as above –– 4 WALLETS FROM 2 FQ’S! 2 of each ‘arrangement’.
Cut 4 SETS of 5 x 7
Cut 4 SETS of pocket pieces (1 each 7x7 and 4 1/2" x 7)
save the leftover pieces for yo-yo's! you'll need 4 1/2" squares for the yo-yo's, but they are optional!
If your button of choice is large or has a shank, you may want to skip this step, but to make a yo-yo without one of those new fancy plastic molds, you can use a canning jar ring to make a small one. Just trace around the inside and outside to define your 'foldover' - baste with a double thread in your needle, and pull up the gathers and tie a knot. Don't pull it up too tight - you want your button to nestle down into it, not sit on top.
Fold pocket pieces in half lengthwise and press so they are both 7” along folded edge. Thread machine with topstitching thread, lengthen stitch length, topstitch ¼” in from folded edges of both pockets.
NOTE: you may need a jeans needle or topstitching needle to accommodate the denser fabric layers and 40wt threads.
 |
| pockets are top-stitched |
Stack pockets on right side of lining (5x7) fabric.
Baste pockets along outside edges –if using a heavy top stitching thread, resume use of regular sewing thread until ready for final top stitching.
Baste pockets along outside edges –if using a heavy top stitching thread, resume use of regular sewing thread until ready for final top stitching.
Baste elastic in place on left side – button on the right side.
You are now ready to join the outside and lining together.....
With elastic in correct position opposite button… layer right sides together and pin.
Make sure pockets are upright so that wallet opens to the right.
I used lots of pins to hold the layers together....Sew around outside edges - use a 'generous' 1/4" seam, leave an opening at the top back edge (the side the elastic is on) for turning - you want to be able to get your thumb into that hole!
I sew straight off the edges, then come back and angle the corners like this.
Trim seam allowances at corners to reduce bulk - trim away any extra fusible interfacing while you're at it...
I like to press the seam allowance open - put a piece of cardstock (a postcard that's fallen out of a magazine works great!) against the seam line where the opening is and press against the cardstock to fold open the seam allowance. Pressing this open now will make it easier to match the edges after you turn it right side out. Not a critical step, but helpful.
Turn wallet right side out.
Use a blunt stick to push out corners and seams - press.
Before top-stitching, confirm that wallet is assembled correctly and that elastic reaches button!
Put the top stitching thread back in your machine and...
Top stitch 1/8” away from edge, catching the opening within the seam allowances which were previously pressed.
Trim thread ends, using a drop of sealant such as “Fray Check” to secure ends of topstitching.
Wallet is now ready to take to tea!
 |
| Tea Bags, sweetener, credit card - ready for shopping! |
Go ahead - try it - bet you can't make just one!
